Loading ...
Loading ...
Loading ...
2.1 EXTERNAL APPEARANCE
The outer appearance of the refrigerator is shown in figure 2.
The cabinet consists of an external shell and an internal one in galvanized and plastified
sheet; between them insulating material (polyurethane) is introduced.
Starting from the lower part of the appliance you can see the compressor compartment
front grill (26), the controls panel (18) with its plastic cover (44), the heated glass door and
the illuminated display (9). The hermetic seal of the door is guaranteed by a magnetic gasket
(30), hitting the cabinet metal frame.
In the back of the cabinet there is a white plastified cover sheet, in order to protect
mechanical and electrical component parts, secured to the back of the cabinet by self-tapping
screws; this cover has an access hole, marked with "a" in fig. 6, allowing to start the defrosting
phase by acting directly on the timer (TS) (81).
At the bottom, compared to the cover sheet, there is the rear metal grill (29), that protects
the rear access to the compressor compartment. The refrigerator power cord with plug (CS)
(10) goes out through this grill.
FIG.2
- 10 -
Loading ...
Loading ...
Loading ...