Loading ...
Loading ...
Loading ...
3.2 BASIC SAFETY RULES
The supply voltage net, to which the refrigerator shall be plugged, must have an additional
safety earth circuit.
The machine must be plugged into a socket
with earth pole protected by a differential
magnetothermic switch with rated Power =
15A and differential Power = 30mA.
Do not use extensions or multiple sockets.
Do not remove the protective grills: no action
to solve possible malfunctions can be done by
the user on the protected parts of the
appliance.
Do not move the machine while it is plugged in.
When the machine is plugged in, it is necessary to pay attention that the plug itself is well
connected to the socket, that it is not going out by taking the position shown in figure 24. If
the socket terminals are visible, as shown in figure 24, change the target socket; if you
meet resistance in plugging in the machine or in case you cannot plug it in at all, do not
force it and try to plug the machine into another socket.
If in the room you cannot find a suitable socket, make one installed by a skilled technician.
Do not plug in if the refrigerator is not locked in place and levelled by its feet (47).
Handle the machine carefully, avoiding shocks or rough movements on the whole structure
and mostly on the moving parts (door, shelves). The system, in the conditions it has been
shipped from the factory, can guarantee an adequate protection level against electric
shocks until all panels, protection grills and covers remain intact and in their original
position.
It is recommended not to expose the door glass to possible shocks and not to force the
door in the limit stop position.
Do not move the refrigerator when it is plugged into the electric socket. In any case, avoid
disassembling any part of the refrigerator until it has been disconnected.
While disconnecting the machine do not pull the power cord, but act directly on the plug; it
is absolutely necessary to avoid exposing the plug to torsions or flexions.
Do not interpose between plug and electric socket any connection device, such as multiple
sockets, reduction gears, extensions and such like.
Avoid leaning on the upper part of the door, when it is open.
Avoid washing the refrigerator with running water or, in any case, avoid direct jets of water
towards the refrigerator.
Do not touch the refrigerator with wet hands and/or feet.
Before carrying out any kind of maintenance operation on the refrigerator, make sure that
the machine is disconnected.
For any maintenance operation, address to the technical assistance.
FIG. 24
- 21 -
Loading ...
Loading ...
Loading ...