Loading ...
Loading ...
Loading ...
2.4 MECHANICAL AND ELECTRICAL PARTS IN THE COMPRESSOR
COMPARTMENT
At the bottom of the refrigerator there is the
compressor compartment, enclosed frontally by the
plastic grill (26) and at the back by the metal grill
(29). It is absolutely necessary that all the grills are
not removed or deteriorated: obstructing the
openings reduces the necessary air circulation for
heat exchange; opening or breaking them exposes
people to the risk of physical damages caused by
contact with hot, moving or electrically live parts.
To reach the compressor compartment from the
front side, it is necessary to remove the two screws
marked in fig. 12 and then the front grill (26).
To access the controls located on the plastic support
(18) is necessary to extract the control panel by
removing the screws that fix it on the door support
frame: these two screws, represented in fig. 14 and
15, are located behind the controls support panel
(44), removable as shown in the previous paragraph.
One of these is hidden by the plastic stopper of the
extension tube for the bottom tank drainage, marked
with an arrow in fig. 13: press it and the spring will
push it out automatically; rotate the extension tube 90° (fig. 14) and at this point the screw
shown in fig. 14 is visible.
FIG. 12
FIG. 13
FIG. 14
FIG. 15
- 14 -
Loading ...
Loading ...
Loading ...