Loading ...
Loading ...
Loading ...
FIG. 18d
- 17 -
In the upper part, on the left, there is an access hole (fig. 18d nr. "3") to the inner tank for
the wires supplying the electrical components located there.
On the same side there is an access hole for welding operations on the connection pipes
of the evaporator (fig. 46), protected by an insulating cover (13) consisting of a plastic shell
insulated with polyurethane: the cover, marked with "5" in figure 18d, is fixed to the cabinet
body by four self-tapping screws, highlighted in fig. 45.
In the meddle back, on the left-hand side of the refrigerator, there is an access hole for the
thermometer and thermostat sensors, marked with "4" in fig. 18d.
The Evaporator gutter heater is marked with "2" in fig. 18d.
FIG. 18c
FIG. 18e
Support plate
Main relay
Strain relief
Loading ...
Loading ...
Loading ...