Loading ...
Loading ...
Loading ...
4.2.3 EVAPORATOR HEATER REPLACING
Remove the evaporator cover (8) and the back metal cover in the rear side of the cabinet,
as already explained at paragraph 2.3 and 2.5. Disconnect the terminal junction of the
heater, marked with an arrow in fig. 40, and extract the terminals, proceeding as already
explained in the paragraph 4.1.1 in fig. 26. Remove the insulating mastic highlighted in fig.
35 and pull the wires inside the tank. Remove the evaporator gutter, loosening the screws
indicated in fig. 33 and 34: lower the frontal part of the gutter and push it back, in order to
move it away from the rear supports indicated in fig. 37. Cut the metal fasteners of the
evaporator heater, circled in fig. 41, and replace the heater (REV) (66).
FIG. 40
FIG. 41
- 27 -
4.2.4 EVAPORATOR GUTTER DRAINING TUBE HEATER REPLACING
Remove the evaporator cover (8) and the back metal cover in the rear side of the
cabinet, as already explained at paragraph 2.3 and 2.5. Disconnect the terminals of
the gutter heater from the terminal board ("7" in fig. 18b). Remove the insulating
adhesive cover (indicated in fig. 9) of the plastic toggle joint (6) and remove it, loosening
the screws marked with "1" in fig. 10. Remove the heater (RSG) (65) and replace it.
Loading ...
Loading ...
Loading ...