Loading ...
Loading ...
Loading ...
- 24 -
4.1 MAINTENANCE OF THE CABINET
4.1.1 DOOR REPLACING
To replace the door remove the display plastic frame (9) by
unscrewing the 4 screws as shown in fig. 19 and 20; then
remove the front grill (26) and the control panel (18) with its
cover (44) as already described at paragraph 2.4. Disconnect
the cable of the glass and frame heaters by removing the door
electrical terminal connection located in the compressor
compartment, as shown in figure 25 and extract the terminals
from the junction by means of a flat screwdriver as in figure
26.
Go now to the upper part of the door and rotate, by means of
the screwdriver "1", the slotted head as much as necessary
to remove the screw by means of the screwdriver "2", as
shown in figure 27; loosen now the hinge screws as in figure
28.
Thus, raise the door and remove it from the lower hinge as in
figures 29 and 30.
FIG. 25
FIG. 26
1
Screw
2
Slotted
head
FIG. 28
FIG. 29
FIG. 27
FIG. 30
Loading ...
Loading ...
Loading ...