Loading ...
Loading ...
Loading ...
Alert Message Cause Watch Action
Dive will end in %1
seconds.
The watch will automatically end and save the
dive. During a dive, "%1" is replaced by the
number of seconds.
None
Do not dive. Failed to read
depth sensor.
The watch has invalid or missing depth
sensor data before you start a dive activity.
Do not start a dive. Call Garmin
Product Support.
Failed to read depth
sensor. End your dive now.
The watch has invalid or missing depth
sensor data after you have started a dive
activity.
Use a backup dive computer or
dive plan and end your dive. Call
Garmin Product Support.
NDL exceeded. Decom
pression now required.
You have exceeded your NDL time. None
PO2 is high. Ascend or
switch to lower O2 gas.
Your PO2 value is above the specified critical
value.
The alert appears every 30
seconds, up to three times, until
you ascend to a safe level or
switch gases.
PO2 is low. Descend or
switch to higher O2 gas.
Your PO2 value is below 0.18 bar.
The alert appears every 30
seconds, up to three times, until
you descend to a safe level or
switch gases.
Safety Stop Cleared You completed the safety stop. None
In a multi-gas dive, a gas with a higher oxygen
content is now safe to breathe. During a dive,
"%1" is replaced with the name of the gas.
You can switch gases now, or
wait to switch gases later in the
dive. A confirmation message for
your choice appears.
Switched to high setpoint.
The watch automatically switched to your
specified CCR high setpoint.
None
Switched to low setpoint.
The watch automatically switched to your
specified CCR low setpoint.
None
This pool dive will not be
saved to the dive log.
The watch is in pool dive mode.
The watch will not save the
current dive to the dive log.
Diving 25
Loading ...
Loading ...
Loading ...