Loading ...
Loading ...
Loading ...
4 Configuration DES-1210/ME Series Metro Ethernet Managed Switch User Manual
1
1
9
9
Baud Rate: Set the serial bit rate used to communicate with a management station. The console baud rate
is 9600 bits per seconds.
Auto Logout: This sets the time the interface can be idle before the seitch automatically logs-out the user.
The options are 2 mins, 5 mins, 10 mins, 15 mins, or Never.
Click Apply for the settings to take effect.
System > IP Interface
The IP Interface page allow user to configure the IPv6 system settings.
.
Figure 4.16 – System > IP Interface
Interface Name: Specifies the name of IP interface.
VLAN Name: Specifies the VLAN name of IP interface.
IPv4 Address: Specifies the IPv4 address for the interface.
Netmask: Select the netmask of IP address.
Interface Admin State: Enables or disables the interface administration state.
Click Add for the settings to take effect.
System > IPv6 System Settings
The IPv6 System Settings page allow user to configure the IPv6 system information.
.
Figure 4.17 – System > IPv6 System Settings
IPv6 System Settings:
Interface Name: Displays the interface name of IPv6.
IPv6 State: Specifies the IPv6 to be enabled or disabled.
DHCPv6 Client: Specifies the DHCPv6 client to be enabled or disabled.
IPv6 Network Address: Specifies the IPv6 Network Address.
Loading ...
Loading ...
Loading ...