Loading ...
Loading ...
Loading ...
4 Configuration DES-1210/ME Series Metro Ethernet Managed Switch User Manual
104
Monitoring > Packets > Transmitted (TX)
The Transmitted (TX) page displays the following graph of packets transmitted from the Switch. To select a
port to view these statistics for, use the Port pull-down menu. The user may also use the real-time graphic of
the Switch at the top of the web page by simply clicking on a port.
Figure 4.168 - Monitoring > Packets > Transmitted (TX) (line graph for Bytes and Packets)
To view the Transmitted (TX) Table, click the link
View Table, which will show the following table:
Figure 4.169 - Monitoring > Packet s > Transmitted (TX) (table for Bytes and Packets)
The following fields can be set or viewed:
Time Interval: Select the desired setting between 1s and 60s, where “s” stands for seconds. The default
value is one second.
Record Number: Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Bytes: Counts the number of bytes successfully sent from the port.
Packets: Counts the number of packets successfully sent on the port.
Unicast: Counts the total number of good packets that were transmitted by a unicast address.
Multicast: Counts the total number of good packets that were transmitted by a multicast address.
Broadcast: Counts the total number of good packets that were transmitted by a broadcast address.
Show/Hide: Check whether or not to display Bytes and Packets.
Clear: Clicking this button clears all statistics counters on this window.
View Table: Clicking this button instructs the Switch to display a table rather than a line graph.
Loading ...
Loading ...
Loading ...