Loading ...
Loading ...
Loading ...
41
Start
Before setting the cleaning function, ensure that you
have followed all instructions for preparation.
Cleaning takes 1 hour. The duration cannot be changed.
1.
Turn the function selector to CLEAN MODES.
2.
Swipe to the left or right to select "Ecolytic Clean ™".
3.
Touch the bottom line.
The cleaning time with Ecolytic Clean is displayed.
4.
Touch the bottom line.
After a few seconds the appliance starts Ecolytic
Clean. The remaining time appears on the display.
Keep the kitchen ventilated while the cleaning function is
running.
As soon as the cleaning aid has run through, a signal
sounds and the appliance ends the operation
automatically.
Once the Cleaning Function has Ended
Once the oven cavity has cooled down, wipe down the
oven cavity with a damp cloth if necessary.
Note: During operation and while the cleaning function
is active, reddish patches may form on the surfaces. This
is not rust, but food residues. These patches are not
hazardous to your health and do not limit the cleaning
capacity of the self-cleaning surfaces.
Easy Clean
The Easy Clean function makes it easier to clean the
oven floor. Food and food spills are soaked beforehand
by vaporizing the vinegar solution. It can then be
removed more easily.
9 WARNING
RISK OF SCALDING
Hot steam can arise due to water in the hot oven
cavity. Never pour water into the hot oven cavity.
Setting
The "Easy Clean š" function can only be started once
the oven cavity is cold (room temperature) and the
appliance door is closed.
Do not open the appliance door during this operation.
Doing this will interrupt the "Easy Clean š" function.
1.
Remove the accessories and racks from the oven
cavity.
2.
Turn the function selector to CLEAN MODES.
3.
Swipe to the left or right to select "Easy Clean š".
4.
Touch the bottom line.
After a few seconds the appliance starts the Easy
Clean function. The remaining time appears on the
display.
Exit
As soon as the cleaning function has run through, a
signal sounds and the appliance ends the operation
automatically.
As soon as you open the appliance door, the interior
lighting is switched on so that you can rinse the oven
cavity more easily. The remaining water in the oven cavity
must be removed promptly. Do not leave the remaining
water in the oven cavity for a long time (e.g. overnight).
The appliance must not be operated when the oven
cavity is still wet or damp.
Subsequent Cleaning
1.
Open the appliance door and remove the remaining
water with an absorbent sponge cloth.
2.
Clean the smooth surfaces in the oven cavity with a
dish cloth or a soft brush. Stubborn residues can be
removed using a soft scouring pad.
3.
Remove limescale with a cloth soaked in vinegar.
Then wipe with clean water and rub dry with a soft
cloth (including under the door seal).
4.
Turn the function selector to OFF.
5.
Leave the appliance door ajar in the stop position
(approx. 30°) for approx. one hour to allow the enamel
surfaces in the oven cavity to dry thoroughly.
Alternatively, you can also run the Drying function for
the oven cavity.
Running the Drying Function for the Oven Cavity
1.
Turn the function selector to CLEAN MODES.
2.
Swipe to the left or right to select "Drying ª".
3.
Touch the bottom line.
After a few seconds the appliance starts Drying. The
remaining time appears on the display.
As soon as the Drying function has run through, a signal
sounds and the appliance ends the operation
automatically.
Removing Heavy Food Deposits
You have several options for removing particularly
stubborn food deposits.
▯ Leave the vinegar solution to work for some time
before starting Easy Clean.
▯ Rub vinegar solution onto the food and food spills on
the smooth surfaces before starting Easy Clean.
▯ Repeat the Easy Clean function after the oven cavity
has cooled down.
Loading ...
Loading ...
Loading ...