Loading ...
Loading ...
Loading ...
19
Before First Use
Before you can use your new appliance, you must enter
certain settings. You must also clean the oven cavity and
accessories.
Before Using the Appliance for the First
Time
▯ Appliance must be properly installed by a qualified
technician before use.
▯ Remove all packing materials from inside and outside
the oven.
▯ While cool, wipe with a clean, damp cloth and dry.
▯ There may be a slight odor from your new appliance;
this is normal and will disappear after a short time.
▯ Optimum cooking results depend on proper cookware
being used.
▯ Read and understand all safety precautions and Use
and Care Manual information.
Execute the following sections prior to operating:
Water Hardness
Before using the appliance for the first time, enquire
about the water hardness of your tap water from your
water supplier.
In order for the appliance to reliably remind you to
descale it when required, you must correctly set your
water hardness range.
NOTICES
▯ The appliance may become damaged due to the use
of unsuitable liquids.
Do not use distilled water or other liquids.
Only use cold, fresh tap water, softened water or non-
carbonated mineral water.
▯ If your water is very hard, we recommend that you use
softened water.
▯ If you only use softened water, you can set the water
hardness range to "softened" in this case.
▯ If you use mineral water, set the water hardness range
to "4 very hard".
▯ If you use mineral water, you must only use non-
carbonated mineral water.
Initial Use
As soon as the appliance is connected to the power
supply, the first setting "Time of day" appears on the
display.
Setting the time of day
1.
Touch the bottom line.
The time setting options are displayed.
2.
Touch the “Hours” touch field and swipe to the left or
right to select the current hour.
3.
Touch the "Minutes" touch field and swipe to the left or
right to select the current minute.
4.
Touch the 8 symbol to apply the settings.
Setting the language
1.
Touch the bottom line.
2.
Swipe to the left or right to select the required
language.
3.
Touch the top line.
Setting the Clock Display
1.
Touch "Clock display".
2.
Touch the bottom line.
3.
Swipe to the left or right to select “digital” or
“analogue”.
4.
Touch the top line.
Water hardness range Setting
0 0 softened
1 (up to 60 ppm) 1 soft
2 (60-120 ppm) 2 medium
3 (120-180 ppm) 3 hard
4 (above 180 ppm) 4 very hard
0LQXWHV
+RXUV
/DQJXDJH
(QJOLVK
6HWWKHODQJXDJH\RXUHTXLUH
7LPHRI'D\ &ORFN'LVSOD\
/DQJXDJH
(QJOLVK
6HWWKHODQJXDJH\RXUHTXLUH
)UDQoDLV(VSDxRO
Loading ...
Loading ...
Loading ...