Loading ...
Loading ...
Loading ...
25
Temperature Offset
This feature is useful if food is consistently either too
brown or too light. The setting increases or decreases
the set oven temperature according to the chosen value.
The following heating modes support this functionality:
▯ Bake
▯ Convection Bake
▯ Roast
▯ Convection Roast
▯ True Convection
Note: The oven is carefully calibrated to provide
accurate results. This feature is useful if you prefer your
foods darker or lighter.
Refer to the section entitled “Adjusting Basic Settings” to
apply a temperature offset.
Note: For double ovens you can set a different
temperature offset for each oven cavity.
Meat Probe
Your oven comes with a multi-point meat probe. This
probe measures the temperature in three different areas
of your food ensuring the most accurate cooking results.
Once the set temperature has been reached, the
appliance automatically switches itself off.
Suitable Heating Modes
▯ True Convection ‚
▯ Convection Bake ¶
▯ Bake ƒ
▯ Convection Roast þ
▯ Roast ü
▯ Slow Roast ÿ
Notes
▯ The meat probe measures the temperature on the
inside of the food between 85° F (30 °C) and 210° F
(99 °C).
▯ Use only the meat probe supplied with your appliance.
Additional or replacement meat probes can be
ordered as a spare part from Customer Service.
▯ After use, always remove the meat probe from the
oven cavity. Never store it inside the oven cavity.
Inserting the Meat Probe into the Food
Before placing your food into the oven cavity, insert the
meat probe into the food.
The meat probe has three measuring points. Ensure that
the middle measuring point is inserted in the food.
Meat: For large pieces of meat, insert the meat probe at
an angle from above as far as it will go into the meat.
For relatively thin pieces of meat, insert the meat probe
from the side at the thickest point.
Steam Oven Cavity:
Conventional Oven Cavity:
Poultry: Insert the meat probe as far as it will go into the
thickest point in the breast. Insert the meat probe into the
poultry crosswise or lengthwise depending on its
structure. Put the chicken in a roasting dish and place it
on the wire rack.
Turning the food: If you wish to turn the food, do not
unplug the meat probe from the oven. Once you have
turned the food, check that the meat probe is correctly
repositioned in the food.
If you unplug the meat probe from the oven, all settings
will be reset and you will have to apply them again.
Loading ...
Loading ...
Loading ...