Loading ...
Loading ...
Loading ...
CVP-709/CVP-705 Owner’s Manual
102
CVP-709 (Grand piano type) Assembly
CVP-709 (Grand piano type) Assembly
CAUTION
• Assemble the unit on a hard and flat floor with ample space.
• Be careful not to confuse or misplace the parts, and be sure to
install all parts in the correct orientation. Please assemble the
unit in accordance with the sequence described here.
• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified sizes.
Do not use any other screws. Use of incorrect screws can cause
damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of each
unit.
• To disassemble the unit, reverse the assembly sequence.
Remove all parts from the package and make sure you have all
of the items.
1 Lean the main unit against the wall as
shown.
1 Spread a large soft cloth, such as a blanket, as shown to
protect the floor and wall surfaces.
2 Lean the main unit against the wall with the key cover
closed and the keyboard side on the bottom.
CAUTION
Be careful not to pinch your fingers.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
Power cord
Legs
6 x 20 mm fixing screws x 4
Cord holder
6 x 40 mm fixing screws x 12
Headphone hanger
4 x 10 mm
thin screws x 2
To prevent the key cover from accidentally opening during assembly,
press down on the key cover, making sure that the sheets (shown) remain
in place.
Main unit
To prevent damage to the MIC-HPJ unit located at the bottom of main unit,
make sure to place main unit on the styrofoam pads.
Also, make sure that the pads do not touch the MIC-HPJ.
Pedal box
Bundled pedal cord inside.
The pedals are covered with
covers when shipped from the
factory. Remove the cover from
the damper pedal for optimum
use of the GP Responsive
Damper Pedal effect.
Protective pads x 2
NOTICE
Do not place the main unit as shown in the illustration here.
1
2
Large soft cloth
Styrofoam pads
Protective pads
Incorrect
Incorrect
Incorrect
Loading ...
Loading ...
Loading ...