Loading ...
Loading ...
Loading ...
English - 29
06 TROUBLESHOOTING & ERROR CODE
troubleshooting and error code
TROUBLESHOOTING
Becoming familiar with a new appliance always takes a little time. If you
have any of the problems listed below, try the solutions given. They may
save you the time and inconvenience of an unnecessary service call.
The following are normal occurrences.
• Condensationinsidetheoven
• Airowaroundthedoorandoutercasing
• Lightreectionaroundthedoorandoutercasing
• Steamescapingfromaroundthedoororvents
The food is not cooked at all
• Have you set the timer correctly and pressed the Start/+30s ( )
button?
• Isthedoorclosed?
• Haveyouoverloadedtheelectriccircuitandcausedafusetoblowora
breaker to be triggered.
The food is either overcooked or undercooked
• Was the appropriate cooking length set for the type of food?
• Wasanappropriatepowerlevelchosen?
The oven causes interference with radios or televisions
• Slight interference may be observed on televisions or radios when the
oven is operating. This is normal.
• Solution: install the oven away from televisions, radios and aerials.
• If interference is detected by the oven’s microprocessor, the display may
be reset.
• Solution:Disconnectthepowerplugandreconnectit.Resetthe
time.
The light bulb is not working.
The Light bulb should not be replaced in person for safety reasons.
Please contact nearest authorised Samsung customer care, to arrange
for a qualified engineer to replace the bulb.
Sparking and cracking occur inside the oven (arcing)
• Have you used a dish with metal trimmings?
• Haveyouleftaforkorothermetalutensilinsidetheoven?
• Isaluminumfoiltooclosetotheinsidewalls?
If the above guidelines do not enable you to solve the problem, then
contact your local SAMSUNG customer service centre.
Please have the following information read;
• Themodelandserialnumbers,normallyprintedontherearofthe
oven
• Yourwarrantydetails
• Acleardescriptionoftheproblem
Then contact your local dealer or SAMSUNG aftersales service.
ERROR CODE
“SE” message indicates.
• The“SE”messageisCleanthekeysandcheckifthereiswateron
the surface around key. Turn o the microwave oven and try setting
again.Ifitoccursagain,callyourlocalSAMSUNGCustomerCare
Centre.
MS23F302TAK_SP_DE68-04237B_EN.indd 29 11/1/2013 8:46:43 AM
Loading ...
Loading ...
Loading ...