Loading ...
Loading ...
Loading ...
English - 14
CHECKING THAT YOUR OVEN IS OPERATING
CORRECTLY
The following simple procedure enables you to check that your oven is
working correctly at all times.
Open the oven door by pulling the handle on the right side of the door.
Place a glass of water on the turntable. Then, close the door.
1. Press the Microwave ( ) button.
Result : The 800W (maximum cooking power)
indications are displayed.
2. Set the time 4 to 5 minutes by turning the dial knob
and press the Start/+30s ( ) button.
Result: The oven light comes on and the
turntable starts rotating.
1) Cookingstartsandwhenithasnishedtheovenbeeps
4 times.
2) The end reminder signal will beep 3 times (once every
minute).
3) The current time is displayed again.
The oven must be plugged into an appropriate wall socket. The
turntable must be in position in the oven. If a power level other than the
maximum is used, the water takes longer to boil.
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “:0”,
“88:88” or “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24- hour
or 12-hour notation. You must set the clock:
• Whenyourstinstallyourmicrowaveoven
• Afterapowerfailure
Do not forget to reset the clock when you switch to and from summer
and winter time.
Auto energy saving function
If you do not select any function when appliance is in the middle of
setting or operating with temporary stop condition, function is canceled
and clock will be displayed after 25 minutes.
Oven Lamp will be turned o after 5 minutes with door open condition.
1. To display the time in the...
24-hour notation.
12-hour notation.
Press the Clock ( ) button once or twice.
2. Turn the dial knob to set the hour.
3. Press the Clock ( ) button.
4. Turn the dial knob to set the minute.
5. Press the Clock ( ) button.
MS23F302TAK_SP_DE68-04237B_EN.indd 14 11/1/2013 8:46:37 AM
Loading ...
Loading ...
Loading ...