Loading ...
Loading ...
Loading ...
3
81
Ease of use and comfort
Rear head restraints
Before doing anything to the seats in the
3
rd
row, straighten the continuity panels of
the seats in the 2
nd
row.
Do not try to fold a seat in the 3
rd
row
without having opened it until the backrest
is fully locked.
Do not leave anything on or underneath
the seats in the 3
rd
row when they are
being folded.
Do not guide strap F when storing the
seat – your fingers may get jammed!
They have two positions:
- a high position, for when the seat is in use:
F pull the head restraint fully up.
- a low position, for stowing, when the seat
is not in use:
F press the lug A to release the head
restraint and push it fully down.
The rear head restraints can be removed.
To remove a head restraint:
F pull the head restraint as far up as it will go,
F press the lug A to release the head restraint
and remove it completely,
F stow the head restraint.
To refit a head restraint:
F insert the head restraint rods into the guides
in the corresponding seat backrest,
F push the head restraint down as far as it
will go,
F press the lug A to release the head restraint
and push it down.
Never drive with passengers seated at
the rear when the head restraints are
removed; they must be in place and in the
high position.
Seat removal
Removing the right-hand seat first is
recommended in order to make it easier to
access the left-hand seat unlocking control.
F Fold back the concertina board.
The seat must be in the folded away
position.
These operations must be performed from the
boot sill.
F Lift the yellow lever G, located on the right-
hand side, as far as possible to unlock the
seat.
F While keeping the yellow lever held at the
highest position, raise the rear part of the
seat using the red strap F.
Loading ...
Loading ...
Loading ...