Loading ...
Loading ...
Loading ...
186
Driving
Pause
The adaptive cruise control can be paused
manually by:
- action by the driver:
• On button 4 (Pause).
• On the brake pedal.
• On the electric parking brake control.
• By changing from mode D to N with an
automatic gearbox.
When the cruise control is paused, it
can only be reactivated when all of the
safety conditions are met. The message
"Activation not possible, conditions
unsuitable" is displayed while reactivation is
not possible.
To reactivate the function, the driver
must accelerate to reach at least 19 mph
(30 km/h), then press one of the
buttons 2, 3 or 4.
As a safety measure, wait until the current
speed reaches the speed setting to
reactivate the function by pressing button 4.
Versions fitted with an automatic
gearbox
Following braking of the vehicle bringing it
to a complete stop, the system holds the
vehicle stationary; the cruise control is
paused.
The driver should press the accelerator
pedal to move off, then reactivate the
system above 19 mph (30 km/h) by
pressing button 2, 3 or 4.
If the driver takes no action following
this immobilisation, the electric parking
brake is applied automatically after a few
minutes.
Modification of the speed
setting
Modication from the current
speed
F By successive short presses on button 2 or
3, to raise or lower the setting in steps of
1 mph (km/h).
F By a maintained press on button 2 or 3, to
raise or lower the setting in steps of 5 mph
(km/h).
Take care: the maintained press on button
2 or 3 will cause a very quick change in
the speed of your vehicle.
Modication from the speed limit
sign recognition system
F The suggested speed is displayed in the
instrument panel.
Engine running and cruise control on (green),
you can modify the speed setting.
F With the engine running, turn the
thumbwheel 1 to the "CRUISE" position to
select cruise control mode: the function is
paused (displayed in grey).
F Vehicle moving, press one of the buttons
2 or 3: the current speed of your vehicle
becomes the cruise speed setting.
The cruise control starts operating (displayed
in green).
By default, the inter-vehicle distance is set at
"Normal" (2 dashes).
Otherwise, the last setting made will be used
when switching on the system.
Switching off the ignition cancels any speed
setting value chosen by the driver.
- or automatically, if operation of the ESC
system is triggered for reasons of safety.
Loading ...
Loading ...
Loading ...