Loading ...
Loading ...
Loading ...
72
Ease of use and comfort
1. Adjusting the angle and height of the seat
cushion/Adjusting the seat forwards and
backwards
F Raise or lower the front of the control to
obtain the desired seat cushion angle.
F Raise or lower the rear of the control to
raise or lower the seat cushion.
F Slide the control forwards or backwards to
move the seat forwards or backwards.
2. Adjusting the seat backrest angle
F Turn the control forwards or backwards to
recline the backrest to the desired angle.
3. Adjusting the height of the head restraint
Refer to the corresponding section.
4. Adjusting the length of the seat cushion
F Pull the handle forwards to release the
cushion, then move the front part of the seat
cushion forwards or backwards.
5. Adjusting the lumbar support
The control allows independent adjustment of
the depth and vertical position of the lumbar
support.
F Press and hold the front or rear of the
control to increase or reduce the lumbar
support.
F Press and hold the top or bottom of the
control to raise or lower the lumbar support
area.
Before moving the seat backwards,
ensure that there is nothing that might
prevent the full travel of the seat.
There is a risk of trapping or pinching
passengers if present in the rear seats
or jamming the seat if large objects are
placed on the floor behind the seat.
Storing driving positions
Associated with adjustments of the electrical
driver's seat, this function allows two driving
positions to be memorised, to make these
adjustments easier if there are frequent driver
changes.
Storing a position
Using buttons M/1/2
F Sit in the driver's seat.
F Switch on the ignition.
F Adjust your seat and the door mirrors.
F Press button M, then press button 1 or 2
within four seconds.
An audible signal indicates that the position has
been stored.
Storing a new position cancels the
previous position.
It takes account of the electric adjustments of
the seat and the door mirrors.
Loading ...
Loading ...
Loading ...