Loading ...
Loading ...
Loading ...
8
247
In the event of a breakdown
Access to the spare wheel
Only a "space-saver" type spare wheel
may be fixed beneath the vehicle.
Taking out the spare wheel
Tool storage
The spare wheel is held by a winch system
underneath the back of the vehicle.
F Fold the concertina board and install the
third row seat, on the left-hand side (if your
vehicle is equipped with it).
F Lift the pre-cut section of carpet to remove
the fixing winch nut from the spare wheel.
F With extension piece 8 put on the edge of
wheelbrace 5, turn the nut in the "tightening"
direction to unwind the winch cable until the
spare wheel is flat on the ground. Unwind
the length needed for an easy access to the
wheel.
F Pull out the wheel and box assembly from
the rear of the vehicle.
F Straighten the spare wheel to access the
tool box (A).
F Detach the connecting piece from the cover
of the tool box (B – C).
F Pass the connecting piece through the
wheel hub to release it (D).
F Refit the appropriate tools in the box and
close the cover again.
F Place the tool box on the ground.
Loading ...
Loading ...
Loading ...