Loading ...
Loading ...
Loading ...
256
In the event of a breakdown
Reversing lamps (on the tailgate)
To refit, carry out these operations in reverse
order.
Foglamps
F Open the tailgate, then insert a flat
screwdriver into the cut-out to unclip the
access cover on the side in question.
F Unblock the lamp fixing nut with a 10 mm
box spanner.
F Manually unscrew and remove the lamp
fixing nut.
F Disengage the retaining clip, while pushing
the lamp out slightly.
F From the outside, carefully remove the lamp
by pulling it to the rear.
F Disconnect the lamp connector by pressing
on each side.
F Turn the bulb holder a quarter turn and pull
it out.
F Pull the bulb out and change it.
If changing a bulb within a few minutes
of switching off the ignition, take care not
to touch the exhaust – there is a risk of
burns!
These bulbs are replaced from outside the rear
bumper:
F Pass your hand under the bumper,
F Turn the bulb holder a quarter turn and
remove it,
F Turn the bulb a quarter turn, pull it out and
change it.
To refit, carry out these operations in reverse
order.
Third brake lamp (LED)
Licence plate lamps
F Insert a thin screwdriver into the slot in the
lens.
F Push it out to unclip it.
F Remove the lens.
F Pull the bulb out and change it.
Loading ...
Loading ...
Loading ...