Loading ...
Loading ...
Loading ...
98
Ease of use and comfort
HTM: Heat Thermo Management
F To deactivate the programming, press
button 4 until the message "OK" is
displayed.
During these operations, if the message
"FAIL" is displayed, it means that the
signal has not been received. Restart the
procedure after having changed position.
Stopping the heating
F Press button 5.
Changing the heating level
The system has 5 heating levels: C1 (lowest
level) to C5 (highest level).
F After having displayed the heating level
using buttons 1, press simultaneously on
buttons 4 and 5.
The letter "C" will flash.
F Adjust the heating level by pressing
buttons 1.
F Simultaneously press buttons 4 and 5 to
save the selected level.
The letter "C" will be displayed.
The presets are replaced by the new
entries. The programmed times are
memorised until the next change.
When the start time is activated, it is not
possible to change the heating level. You
must first deactivate the start time.
Operating fault
In the event of a fault with the programmable
heating, contact a PEUGEOT dealer or
a qualified workshop.
Changing the battery
The remote control is powered by a 6 V-28L
battery, which is provided.
Information on the screen indicates when this
battery needs to be changed.
This red indicator lamps comes on
until heating begins.
This symbol is displayed when the
heater starts.
This symbol will disappear.
This symbol remains on.
This indicator lamp goes off.
Do not throw away used batteries, take
them to an approved collection point.
F Unclip the case.
F Replace the battery observing the
polarities.
F Reinitialise the remote control.
Loading ...
Loading ...
Loading ...