Loading ...
Loading ...
Loading ...
#
Before starting the engine: adjust the
driver's seat, the head restraint, the
steering wheel or the mirror and fasten
your seat belt.
&
WARNING Risk of injury due to head
restraints which are not installed or are
adjusted incorrectly
If head restraints are not installed or are
adjusted incorrectly, the head restraints can‐
not provide protection as intended.
There is an increased risk of injury in the
head and neck area, e.g. in the event of an
accident or when braking.
#
Always drive with the head restraints
installed.
#
Before driving off, make sure for every
vehicle occupant that the center of the
head restraint supports the back of the
head at about eye level.
Do not interchange the head restraints of the
front and rear seats. Otherwise, you will not be
able to adjust the height and angle of the head
restraints correctly.
Adjust the head restraint fore-and-aft position so
that it is as close as possible to the back of your
head.
#
To move forwards: pull the head restraint
forwards.
#
To move backwards: press release knob 1
and push the head restraint backwards.
Lowering the rear seat head restraints elec‐
trically from the front compartment
Requirements:
R
The power supply is switched on
#
Press button 1.
%
Depending on the model, button 1 is loca‐
ted on the door control panel on the driver's
side.
Extending the rear seat head restraints elec‐
trically from the front
Requirements:
R
The power supply is switched on
Seats and stowing
89
Loading ...
Loading ...
Loading ...