Loading ...
Loading ...
Loading ...
Folding the outside mirrors in/out
#
Briefly press switch 1.
Resetting the outside mirrors
%
If the battery has been disconnected or com‐
pletely discharged, the outside mirrors must
be reset. Only then will the automatic mirror
folding function work properly.
#
Briefly press switch 1.
Adjusting the outside mirrors
#
Select the required mirror using button 3 or
4.
#
Use button 2 to set the position of the mir‐
ror you have selected.
Engaging the outside mirrors
#
Press and hold button 1.
You will hear a click and the mirror will audi‐
bly engage in position. The mirror is set in
the correct position.
Automatic anti-glare mirrors function
&
WARNING Risk of burns and poisoning
due to the anti-glare mirror electrolyte
Electrolyte may escape if the glass in an
automatic anti-glare mirror breaks.
The electrolyte is harmful and causes irrita‐
tion. It must not come into contact with your
skin, eyes, respiratory organs or clothing or
be swallowed.
#
If you come into contact with electro‐
lyte, observe the following:
R
Rinse the electrolyte from your skin
and seek medical attention immedi‐
ately.
R
If electrolyte comes into contact
with your eyes, rinse them thor‐
oughly with clean water and seek
medical attention immediately.
R
If the electrolyte is swallowed,
immediately rinse your mouth out
thoroughly. Do not induce vomiting.
Seek medical attention immediately.
R
Immediately change out of clothing
which has come into contact with
electrolyte.
R
If an allergic reaction occurs, seek
medical attention immediately.
The inside rearview mirror and the outside mir‐
ror on the driver's side automatically go into
anti-glare mode if light from a headlamp hits the
sensor on the inside rearview mirror.
120
Light and visibility
Loading ...
Loading ...
Loading ...