Loading ...
Loading ...
Loading ...
#
Keep the brake pedal depressed when the
vehicle is stationary.
#
Fold the armrest upwards.
#
To open: pull and hold the soft-top switch
1 until the soft top is fully opened.
The multifunction display shows the opening
process of the soft top.
#
To close: press and hold the soft-top switch
1 until the soft top is fully closed.
The multifunction display shows the closing
process of the soft top.
&
WARNING Risk of accident due to
excessive speed during the soft-top
opening or closing procedure
If the vehicle speed exceeds 37 mph
(60 km/h), the soft top stops during the
opening or closing procedure.
This impairs your view to the rear.
#
Reduce the vehicle speed to below
37 mph (60 km/h) or stop the vehicle,
paying attention to road and traffic con‐
ditions.
#
Operate the soft-top switch again in
order to open or close the soft top fully.
The current procedure is stopped at a speed
above 37 mph (60 km/h). The Open/Close Con-
vertible Top Completely message will be shown
on the multifunction display.
#
Reduce your speed and press or pull the soft-
top switch 1 again.
If the soft top does not close fully because of
strong headwinds, drive more slowly or stop.
Relocking the soft top
&
WARNING Risk of becoming trapped
due to the soft top lowering unexpect‐
edly
If you do not fully open/close the soft top,
the soft-top hydraulics depressurize after a
short time.
This causes the soft top to lower unexpect‐
edly and may cause you or others to be trap‐
ped.
#
Always fully open or close the soft top.
If the soft top has not been completely locked,
the multifunction display shows the Open/Close
Convertible Top Completely message. In addi‐
tion, you will hear a warning tone for up to ten
seconds while driving.
78
Opening and closing
Loading ...
Loading ...
Loading ...