Loading ...
Loading ...
Loading ...
doing so, you will make use of the engine's brak‐
ing effect. This relieves the load on the brake
system and prevents the brakes from overheat‐
ing and wearing too quickly.
Do not use cruise control in the following situa‐
tions:
R
In traffic situations which require frequent
changes of speed, e.g. in heavy traffic, on
winding roads.
R
On slippery roads. Accelerating can cause
the drive wheels to lose traction and the
vehicle could then skid.
R
If you are driving when visibility is poor.
Operating cruise control
&
WARNING Risk of accident due to stored
speed
If you call up the stored speed and this is
lower than your current speed, the vehicle
decelerates.
#
Take into account the traffic situation
before calling up the stored speed.
Requirements:
R
ESP
®
must be activated, but not intervening.
R
The driven speed is at least 15 mph
(20 km/h).
R
The transmission is in position h.
#
To activate cruise control: press rocker
switch 1 up.
#
To activate cruise control: press rocker
switch 2 up (SET/+) or down (SET/-).
The current speed is stored and maintained
by the vehicle.
or
#
Press rocker switch 3 up (RES).
The last stored speed is called up and main‐
tained by the vehicle.
If the last stored speed has previously been
deleted, the currently dr iven speed is stored.
%
When you switch off the vehicle, the last
speed stored is cleared.
#
To increase/reduce speed: press rocker
switch 2 up/down to the pressure point.
The stored speed is increased or reduced by
1 mph (1 km/h).
or
#
Press rocker switch 2 beyond the pressure
point.
The stored speed is increased or reduced by
5 mph (10 km/h).
or
#
Accelerate the vehicle to the desired speed.
Driving and parking
165
Loading ...
Loading ...
Loading ...