Loading ...
Loading ...
Loading ...
22 InitialStichbyPacesetter
InstructionManual
• The stitch length can be adjusted to make a tighter or looser
basting stitch.
• The basting stitches segment may be offset from the actual design.
You can adjust the “Baste past outer edge of design” slider to set
this value, from 0-10 mm.
Adjusting the View of the
Workspace
Magnifying and Reducing the View
Use Zoom to magnify or reduce parts of your design. With Zoom you
can either left-click to enlarge your design or right-click to make your
design smaller.
When you select Zoom, the cursor changes to a small magnifying
glass . To use the Zoom tool, do one of the following:
• To zoom in on the spot where the mouse is currently pointing, left-
click.
• To zoom out again, right-click.
• To zoom in on a particular area, left-click and drag; the display will
expand to show only the area that you have dragged over.
To use the Zoom Tool:
1 On the Ribbon, select the Home tab.
2 In the Zoom toolbar, click on the Zoom tool.
The pointer becomes a magnifying glass.
3 Do either of the following:
Left-click to make your design larger.
Right-click that area to make your design smaller.
To zoom-in on a specific area:
1 On the Ribbon, select the Home tab.
2 In the Zoom toolbar, click on the Zoom tool.
The pointer becomes a magnifying glass.
Loading ...
Loading ...
Loading ...