Subaru 2022 Legacy Limited XT

OWNER'S MANUAL - Page 75

For 2022 LEGACY LIMITED XT.

PDF File Manual, 536 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
(73,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
that the child restraint system is compa-
tible with the vehicle in which it will be
used.
NOTE
Some sizes of child restraint systems
may not fit the vehicle seat. Before
purchasing a child restraint system,
check whether it fits on the vehicle seat.
& Installing child restraint sys-
tems with ALR/ELR seatbelt
S01AG04
CAUTION
. When you install a child restraint
system, follow the manufac-
turers instructions supplied with
it. After installing the child re-
straint system, check to ensure
that it is held securely in position.
If it is not held tight and secure,
the danger of your child suffering
personal injury in the event of an
accident may be increased.
. When installing a child restraint
system in the rear center seating
position, set both seatbacks to
the original position. Otherwise,
the child restraint system cannot
be securely restrained, which
may result in death or serious
injuries in the event of sudden
stop, sudden steering maneuver
or an accident.
! Installing a rearward facing child
restraint system
S01AG0401
WARNING
. NEVER INSTALL A CHILD RE-
STRAINT SYSTEM IN THE FRONT
PASSENGER’S SEAT. DOING SO
RISKS SERIOUS INJURY OR
DEATH TO THE CHILD BY PLA-
CING THE CHILD’S HEAD TOO
CLOSE TO THE SRS AIRBAG.
. Before installing a child restraint
system, be sure to confirm that
the seatback is securely locked
into place. Otherwise, in an acci-
dent, serious injury or death
could result.
1. If the seat is equipped with a slide
mechanism, set the seat as far back as
possible.
2. Place the child restraint system in the
rear seating position.
3. If there is a gap between the child
restraint system and the seatback, adjust
the seatback angle until good contact is
achieved.
NOTE
If the child restraint system cannot be
installed because it contacts the head
restraint, remove the head restraint.
For details, refer to “Head restraints”
FP47.
4. Run the lap and shoulder belt through
or around the child restraint system follow-
ing the instructions provided by its manu-
facturer.
5. Insert the tongue plate into the buckle
until you hear a click.
CONTINUED
Child restraint systems
71
1
Seat, seatbelt and SRS airbags
Loading ...
Loading ...
Loading ...