Loading ...
Loading ...
Loading ...
(156,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
NOTE
The factory setting (default setting) of
the operation for the “
” button on
the access key fob is pressing and
holding. This setting can be changed to
non-operation or pressing twice at
SUBARU dealers. For more details,
contact your SUBARU dealer.
! By the buttons on the rear gate
S02AJ011102
NOTE
After performing the following proce-
dures, an electronic chirp will sound
twice and the hazard warning flashers
will flash twice.
Rear gate opener button
Power rear gate button on the inside edge
of the rear gate
1) Power rear gate button
2) Power rear gate lock button
To open the rear gate:
1. For models with “keyless access with
push-button start system”, carry the ac-
cess key fob. For models without “keyless
access with push-button start system”,
unlock the rear gate.
2. Briefly press the rear gate opener
button when the rear gate is closed.
The rear gate will open automatically.
To pause the opening rear gate:
Briefly press either of the following buttons
while the rear gate is being opened.
. Rear gate opener button
. Power rear gate button on the inside
edge of the rear gate
If you press the power rear gate button
again, the rear gate will close. You can
open the rear gate by pressing the power
rear gate button briefly while the rear gate
is being closed.
NOTE
The rear gate cannot be paused when it
is in the approximately 2 in (5 cm) range
from the fully closed position. The
system will ignore any button operation
and the rear gate will continue to open.
Rear gate
154
Loading ...
Loading ...
Loading ...