Loading ...
Loading ...
Loading ...
(154,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
. The ignition switch is in the “LOCK”/
“OFF” or “ACC” position. Or, the ignition
switch is in the “ON” position and the select
lever is in the “P” position.
We recommend using the power rear gate
function in most circumstances instead of
manual operation.
NOTE
. Do not press the power rear gate
button repeatedly while the power rear
gate is operating. Otherwise, the sys-
tem may ignore the button operation in
order to avoid being damaged.
. If the vehicle starts to move while the
power rear gate is operating, the sys-
tem sounds a buzzer and closes the
rear gate automatically. At this time, if
the system detects jamming, it will
deactivate the power rear gate function
and the rear gate will not be closed. If
this occurs, close the rear gate manu-
ally. For details, refer to “Manual rear
gate” FP150.
. If you try to open the rear gate using
the power rear gate function immedi-
ately after closing the rear gate using
the power rear gate function, an elec-
tronic chirp will sound and the rear gate
will not open. Wait for a while before
trying to open the rear gate via the
power rear gate function.
. If either of the operating conditions
has not been satisfied while operating
the power rear gate, an electronic chirp
will sound and the power rear gate will
be deactivated. In this case, the rear
gate may stop opening or closing
suddenly.
! Operation
S02AJ0111
NOTE
. The rear gate will remain unlocked
even after closing it. Always lock the
rear gate when leaving the vehicle.
. If you cannot open/close the rear
gate by performing the operation de-
scribed as follows, a short electronic
chirp will sound three times (beep,
beep, beep).
! By the power rear gate button
(other than the buttons on the
rear gate)
S02AJ011101
Power rear gate button on the instrument
panel
Rear gate
152
Loading ...
Loading ...
Loading ...