Loading ...
Loading ...
Loading ...
(245,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
. It is also recommended that a new
battery be placed in the hand-
held remote (garage door opener
remote) of the device for quicker
and more accurate training.
. Some vehicles may require the
ignition switch to be turned to the
“ON” or “ACC” position for pro-
gramming and/or operation of
HomeLink.
. Keep the hand-held remote (gar-
age door opener remote) of the
device you are programming for
use in other vehicles as well as
for future HomeLink program-
ming. It is also suggested that
upon the sale of the vehicle, the
programmed HomeLink buttons
be erased for security purposes.
Refer to “Erasing HomeLink But-
tons” FP246.
! Programming a New HomeLink
Button
S03AP070409
1) Indicator Light
2) HomeLink Buttons
1. Press and release the HomeLink but-
ton that you would like to program. The
HomeLink indicator light will flash orange
slowly (if not, refer to “Erasing HomeLink
Buttons” FP246).
1) Garage door opener remote
2. Position the hand-held remote (garage
door opener remote) 1 to 3 in (2 to 8 cm)
away from the HomeLink button that you
would like to program.
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train
better at a distance of 6 to 12 in (15 to
30 cm). Keep this in mind if you have
difficulty with the programming pro-
cess.
– CONTINUED –
Mirrors
243
3
Instruments and controls
Loading ...
Loading ...
Loading ...