Loading ...
Loading ...
Loading ...
(259,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
standards (this includes any gar-
age door opener model manufac-
tured before April 1, 1982). A
garage door that cannot detect
an object signaling the door to
stop and reverse does not meet
current U.S. federal safety stan-
dards.
. It is also recommended that a new
battery be placed in the hand-
held remote (garage door opener
remote) of the device for quicker
and more accurate training.
. Some vehicles may require the
ignition switch to be turned to the
“ON” or “ACC” position for pro-
gramming and/or operation of
HomeLink.
. Keep the hand-held remote (gar-
age door opener remote) of the
device you are programming for
use in other vehicles as well as
for future HomeLink program-
ming. It is also suggested that
upon the sale of the vehicle, the
programmed HomeLink buttons
be erased for security purposes.
Refer to “Erasing HomeLink But-
tons” FP246.
! HomeLink settings
S03AP110801
1) HomeLink buttons
2) Left button
3) Center button
4) Right button
Press any of the left, center or right buttons
to display the main menu. Select
“HOMELINK” using the center button and
press the left button.
NOTE
The main menu cannot be displayed on
the display while the select lever is in a
position other than the “P” position.
! Programming a New HomeLink
button
S03AP110802
1. Select “PROGRAM BUTTON” using
the center button and press the left button.
2. Select the HomeLink button that you
would like to program on the display using
the center button. Then press the left
button.
3. Position the hand-held remote (garage
door opener remote) 1 to 3 in (2 to 8 cm)
away from the mirror.
– CONTINUED –
Mirrors
257
3
Instruments and controls
Loading ...
Loading ...
Loading ...