Loading ...
Loading ...
Loading ...
(145,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
Turning
off lights
– Map light
– Reading light
– Ignition switch light
– Cargo area light
– Ambient lighting
– Vanity mirror light*
1
– Door courtesy light*
1
Actions
– Turn the ignition switch to the
“ACC” or “ON” position.
– Open or close the doors, in-
cluding the rear gate.
– Push the unlock button on the
access key fob or transmitter.
– Hold the front door handle and
unlock it while holding the ac-
cess key fob*
2
.
– Insert the key into the keyhole of
the ignition switch*
3
.
– Come close to the vehicle that
the front door was locked while
holding the access key fob (if
OFF delay timer setting for
period of time is not off)*
2
.
– Push the panic button on the
access key fob or transmitter.
– Push the One-touch Interior
Illumination switch*
1
.
*1: Models with One-touch Interior Illumination
*2: Models with “keyless access with push-
button start system”
*3: Models without “keyless access with push-
button start system”
Take actions to illuminate the lights again
when the battery drainage prevention
function is active.
NOTE
. The battery drainage prevention
function cannot be turned off.
. If the battery drainage prevention
function is in operation when a door is
open, the target room light will not be
illuminated.
. To protect the battery from battery
drainage, make sure that all doors,
including the rear gate, are completely
closed when leaving the vehicle.
. For models with One-touch Interior
Illumination, the map light and reading
light will be turned off when they are
pushed.
. For models without One-touch Inter-
ior Illumination, the map light and
reading light that is turned on by
pushing the switch will not be turned
off.
2-6. Alarm system
S02AF
The alarm system helps to protect your
vehicle and valuables from theft. The horn
sounds and the hazard warning flashers
flash if someone attempts to break into
your vehicle.
For models with “keyless access with
push-button start system”:
The system can be armed or disarmed
with the keyless access function or access
key fob.
The system will not be activated when the
push-button ignition switch is in the “ACC”
or “ON” position.
For models without “keyless access
with push-button start system”:
The system can be armed or disarmed
with the remote transmitter.
The system will not be activated when the
key is inserted into the ignition switch.
Your vehicle’s alarm system has been set
for activation at the time of shipment from
the factory. You can set the system for
deactivation yourself or have it done by
your SUBARU dealer.
– CONTINUED –
Alarm system
143
2
Keys and doors
Loading ...
Loading ...
Loading ...