Loading ...
Loading ...
Loading ...
(63,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
1. Push the release button of the center
seatbelt buckle (on the left-hand side) to
unfasten the seatbelt.
NOTE
When the seatback is folded down, it is
necessary to disconnect the connector.
2. Insert a tongue plate or another hard
pointed object into the slot in the anchor
buckle on the right-hand side and push it
in. The anchor tongue plate will then
disconnect from the buckle.
3. With the belt held by hand, allow the
retractor to roll up the belt slowly. You
should hold the webbing end and guide it
back into the retractor while it is rolling up.
Neatly store the tongue plate in the recess
on the ceiling and then insert the tongue
plate and anchor tongue plate into the slot
as shown in the illustration.
CAUTION
. Do not allow the retractor to roll
up the seatbelt too quickly. Other-
wise, the metal tongue plates
may hit against the trim, resulting
in damaged trim.
. Have the seatbelt fully rolled up
so that the tongue plates are
neatly stored. A hanging tongue
plate can swing and hit against
the trim during driving, causing
damage to the trim.
– CONTINUED –
Seatbelts
61
1
Seat, seatbelt and SRS airbags
Loading ...
Loading ...
Loading ...