Subaru 2022 Legacy Limited XT

OWNER'S MANUAL - Page 43

For 2022 LEGACY LIMITED XT.

PDF File Manual, 536 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
(41,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
optimum for you, it may adversely
affect your driving and may reduce
the effectiveness of the seatbelt.
That could result in an accident
involving serious injury or death.
1. Turn the ignition switch to the “ON”
position.
2. While the select lever is in the “P”
position and the parking brake is applied,
press button “1” or “2”.
A chirp sounds and the seat moves to the
registered position.
NOTE
. If the vehicle battery is removed, the
registered seat position is not deleted.
. When the button “1” or “2” is
pressed within 45 seconds after the
drivers door is opened, the registered
seat position can be retrieved even if
the ignition switch is in the “LOCK” or
“OFF” position.
. When “1” or “2” is pressed, a chirp
sounds twice if the seat position is the
same as the registered position.
. If buttons “1” and “2” are pressed at
the same time, execution of seat posi-
tion retrieval may not be possible.
. When the retrieved position is the
same as the current seat position, a
chirp will sound twice.
! Retrieval of the seat position
registered with access key fob
S01AQ060304
1. Hold the registered access key fob.
2. Unlock the driver’s door by pressing
the
button or gripping the door handle.
3. Open the driver’s door.
A chirp sounds and the seat moves to the
registered position.
NOTE
. If the registered seat position cannot
be retrieved after performing the pre-
vious procedures, try the following
procedures.
(1) Press the “SET” button on the
drivers door.
(2) Press the
button on the
access key fob or touch the door
lock sensor to lock the doors.
(3) Perform the prior procedures
again.
. If the keyless access function is
disabled, the seat position cannot be
retrieved by gripping the driver’s door
handle. However, the seat position can
still be retrieved by pressing the
button on the access key fob. For
information about how to enable/dis-
able the keyless access function, refer
to “Disabling keyless access function”
FP130.
. If a new position is registered for the
same access key fob, the previously
registered seat position is deleted.
. When the driver’s door is opened, a
chirp sounds twice if the seat position
is the same as the registered position.
CONTINUED
Seats
39
1
Seat, seatbelt and SRS airbags
Loading ...
Loading ...
Loading ...