Loading ...
Loading ...
Loading ...
(358,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
! To operate the Auto Vehicle Hold
function
S07AP030503
Stop the vehicle by depressing the brake
pedal when all of the following conditions
are met. Then the Auto Vehicle Hold
function will operate.
. The driver’s door is closed.
. The driver’s seatbelt is fastened.
. The select lever is in a position other
than the “P” position.
Auto Vehicle Hold operation indicator light
While the vehicle is kept held by the Auto
Vehicle Hold function, the Auto Vehicle
Hold operation indicator light will illumi-
nate.
! To release the Auto Vehicle Hold
function
S07AP030504
Perform any of the following operations to
release the Auto Vehicle Hold function.
. Depress the accelerator pedal.
. Depress the brake pedal again.
. Apply the electronic parking brake.
. Shift the select lever to the “P” position
with the brake pedal pressed.
. Press the Auto Vehicle Hold switch with
the brake pedal pressed (The Auto Vehicle
Hold function turns off).
When the Auto Vehicle Hold function is
released, the Auto Vehicle Hold operation
indicator light will turn off.
Under any of the following conditions, the
Auto Vehicle Hold function will be auto-
matically released and the electronic
parking brake will be automatically ap-
plied.
. The Auto Vehicle Hold function has
been in operation for 10 minutes.
. The driver’s seatbelt is unfastened.
. The ignition switch is turned to the
“LOCK”/“OFF” position.
. The vehicle is stopped on a steep
slope.
. The Auto Vehicle Hold function is
malfunctioning.
In such cases, the Auto Vehicle Hold
operation indicator light will turn off and
the electronic parking brake indicator light
will illuminate.
! Tips
S07AP030505
. When the electronic parking brake is
automatically applied with the vehicle kept
held by the Auto Vehicle Hold function,
release the electronic parking brake by
either of the following operations before
starting off. Then make sure that the
electronic parking brake indicator light is
off.
– Depress the accelerator pedal with
the driver’s seatbelt fastened and with
the doors closed.
– Press the electronic parking brake
switch with the brake pedal depressed.
. Under certain conditions, including a
malfunction of the Auto Vehicle Hold, a
warning buzzer will sound and a warning
message will appear on the combination
meter display (color LCD). All warning
messages should be strictly observed.
. On a steep slope, the vehicle cannot be
kept held by the Auto Vehicle Hold func-
tion. In such a case, depress and hold the
brake pedal.
. When holding on a steep slope with the
Auto Vehicle Hold function activated, the
electronic parking brake may automati-
Parking your vehicle
356
Loading ...
Loading ...
Loading ...