Loading ...
Loading ...
Loading ...
(65,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
The pretensioner sensor also serves as
follows.
. Front impact sensor
. Side impact sensor
. Rollover sensor
WARNING
. To obtain maximum protection,
the occupants should sit in an
upright position with their seat-
belts properly fastened. Refer to
“Seatbelts” FP53.
. Do not modify, remove or strike
the seatbelt retractor assemblies
equipped with seatbelt preten-
sioners or surrounding area. This
could result in accidental activa-
tion of the seatbelt pretensioners
or could make the system inop-
erative, possibly resulting in ser-
ious injury. Seatbelt preten-
sioners have no user-serviceable
parts. For required servicing of
seatbelt retractors equipped with
seatbelt pretensioners, consult
your SUBARU dealer.
. When discarding seatbelt retrac-
tor assemblies equipped with
seatbelt pretensioners or scrap-
ping the entire vehicle due to
collision damage or for other
reasons, consult your SUBARU
dealer.
When the seatbelt pretensioners are acti-
vated, an operating noise will sound and a
small amount of smoke will be released.
These occurrences are normal and not
harmful. This smoke does not indicate a
fire in the vehicle.
Once the seatbelt pretensioner has been
activated, the seatbelt pretensioner re-
mains locked. Consequently, the seatbelt
cannot be pulled out and retracted and
therefore must be replaced.
! Shoulder belt pretensioner
S01AF0202
The shoulder belt pretensioner instanta-
neously pulls the belt to eliminate slack if a
certain level of force is detected during
frontal, side or rollover accidents. As a
result, the seatbelt restrains the front seat
occupant more effectively.
The front shoulder belt pretensioner in-
cludes a tension reducing device which
limits the peak forces exerted by the
seatbelt on the occupant in the event of a
collision.
The adaptive force limiter will reduce the
load to suit the body size of the occupant
as detected by the occupant detection
sensor (front passenger’s seatbelt).
! Lap belt pretensioner
S01AF0203
The shoulder belt pretensioner is supple-
mented by a lap belt pretensioner, which is
located at the base of the center pillar. The
lap belt pretensioner instantaneously pulls
the belt to eliminate slack if a certain level
of frontal collision force is detected. As a
result, the seatbelt restrains the front seat
occupant more effectively.
& Second-row (window-side)
seatbelts with shoulder belt
pretensioner
S01AF12
The pretensioner sensor also serves as
follows.
. Front impact sensor
. Side impact sensor
. Rollover sensor
– CONTINUED –
Seatbelt pretensioners
63
1
Seat, seatbelt and SRS airbags
Loading ...
Loading ...
Loading ...