Loading ...
Loading ...
Loading ...
(418,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
CAUTION
When using the spare tire hoist:
Do not use air tools or power tools to
turn the spare tire hoist shaft end. If
you do, it could result in severe
mechanical damage to the spare tire
hoist.
& Re-storage of spare tire
S09AK02
1. Turn the spare tire hoist shaft end
counterclockwise with the wheel nut
wrench to loosen the cable sufficiently
enough to allow the cable end retainer go
through center hole of the temporary spare
tire.
2. Insert the retainer through the center
hole of the temporary tire as showing in the
figure.
3. Turn the hoist shaft end clockwise with
the wheel nut wrench to wind the cable up
completely until you hear a few clicking
sounds. Confirm that the temporary spare
tire holding cable has been wound up
completely by shaking the temporary tire.
CAUTION
If the temporary spare tire is not
stored securely, it could damage
adjacent areas of the vehicle and
make an abnormal noise.
4. Install the rubber cap.
5. Install the cover.
6. Store the wheel nut wrench, two
extensions, jack and jack handle in their
storage locations.
Spare tire
416
Loading ...
Loading ...
Loading ...