Loading ...
Loading ...
Loading ...
(146,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
& Alarm system operation
S02AF01
When the alarm system is armed, it is
triggered by opening any of the doors, the
rear gate or engine hood.
The alarm system will activate the follow-
ing alarms when triggered.
. The vehicle’s horn will sound for 30
seconds.
. The hazard warning flashers will flash
for 30 seconds.
If any of the doors, the rear gate or engine
hood remains open after the 30-second
period, the horn will continue to sound for a
maximum of 3 minutes. If the door, rear
gate or engine hood is closed while the
horn is sounding, the horn will stop
sounding with a delay of up to 30 seconds.
NOTE
The alarm system can be set to trigger
the illumination of the following interior
lights.
. Map lights (illuminates only when
the door interlock switch is in the
“DOOR” position)
. Reading lights
. Cargo area light (illuminates only
when the cargo area light switch is in
the “DOOR” position)
The notifications regarding the map
lights, reading lights and cargo area
light are deactivated as the factory
setting. A SUBARU dealer can activate
the system. Contact your SUBARU
dealer for details.
& Arming the system
S02AF04
The alarm system becomes armed when
the following operation is performed.
1. Close all windows and the moonroof (if
equipped) and turn the ignition switch to
the “OFF” position.
2. Carry the key and get out of the
vehicle.
3. Make sure that the engine hood is
closed.
4. Lock the doors using any of the
following methods.
. Locking using the remote keyless
entry system. For details, refer to
“Remote keyless entry system”
FP135.
. Locking using the keyless access
function (if equipped). For details, refer
to “Locking with the door lock sensor”
FP125.
. Locking using the power door lock-
ing switch. For details, refer to “Locking
using power door locking switch”
FP140.
. Locking using the power rear gate
lock button. For details, refer to “Lock-
ing with the power rear gate lock
button” FP126.
Security indicator light
NOTE
All doors and the rear gate will lock, an
electronic chirp will sound once, the
hazard warning flashers will flash once,
and the security indicator light will start
flashing rapidly.
5. Approximately 30 seconds later, the
system will enter surveillance state.
When the system is in surveillance state,
the security indicator light will then flash
slowly (twice approximately every 2 sec-
onds), indicating that the system has been
armed for surveillance.
Alarm system
144
Loading ...
Loading ...
Loading ...