Loading ...
INSTALLATION RECORD
For future reference keep an accurate record of your installation. Be sure to accurately record the installation data
in the area provided below. In the package containing the owner’s manual a second nameplate is furnished
for identification purposes. This nameplate is to be affixed on to the control box, circuit breaker or fused
disconnect switch.
Purchased From ________________________________
Pump Model No. ________________________________
Pump Serial No. ________________________________
Date of Installation ______________________________
Discharge Pipe Size (in/mm) ______________________
Inside Dia. of Well (in/mm) ________________________
Well Depth (ft/m) ________________________________
Water Depth (ft/m) _______________________________
Pump Depth (ft/m) _______________________________
Well Capacity (US gpm/lpm) ______________________
Draw Down Water Level (ft/m) ____________________
Wire Size (from pump to control box) Gauge _______
Wire Size (from power source to control box) Gauge ___
Distance Between the Well and the House (ft/m) _____
Motor Spec. Hp pH Volts Amps ____________________
Motor Model No._________________________________
No. of Wires _____________________________________
Control Box Spec. Volts Hp _______________________
Control Box Model No. ___________________________
Power Supply - Hz Volts Ph _______________________
Pressure Switch (psi) Cut-in ________Cut-out _______
2
Loading ...
Loading ...
Loading ...