Loading ...
Loading ...
Loading ...
32
GB
Setting the clock
1
Press / to turn on the system.
2
Press MENU.
3
Press / to select “Timer
Menu,” then press ENTER.
If “Play Setting” is displayed, press /
to select “Clock Setting,” then press
ENTER.
4
Press / to set the hour, then
press ENTER.
5
Press / to set the minutes,
then press ENTER.
Complete the clock setting.
Note
The clock settings are reset when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the
system is off
Press DISPLAY to display the clock. The clock
is displayed for about 8 seconds.
If the BLUETOOTH/Network Standby mode is
on, the clock does not appear by pressing
DISPLAY.
Using the timers
The system offers Sleep Timer and Play
Timer.
Note
The Sleep Timer has priority over the Play Timer.
At the specified time, the system is turned
off automatically.
1
Press MENU.
2
Press / to select “Sleep Menu,”
then press ENTER.
3
Press / to select the specified
time, then press ENTER.
You can select from “10minutes” (10
minutes) to “90minutes” (90 minutes)
in 10-minute increments.
Tip
To check the remaining time of Sleep Timer,
perform steps 1 and 2 above.
The Sleep Timer works even if the clock is not
set.
To cancel the Sleep Timer
Select “Off” in step 3 above.
Note
Make sure you have set the clock before setting
the timer (page 32).
Play Timer
You can listen to a CD, USB device or radio
every day at a preset time.
The Play Timer setting remains as long as
the setting is not canceled.
Setting the Sleep Timer
Setting the Play Timer
Loading ...
Loading ...
Loading ...