Loading ...
Loading ...
Loading ...
16
GB
Tuning in a radio
station
1
Press FUNCTION to select “TUNER
FM” or “TUNER AM” (CMT-SX7), or
“DAB” or “TUNER FM” (CMT-
SX7B).
2
Press and hold / until the
frequency indication in the
display window starts changing,
then release the button.
Tuning stops automatically when a
radio station is tuned in (Automatic
Scanning), and “STEREO” (when a FM
stereo broadcast is received) appears in
the display.
Manual tuning
Press / repeatedly to tune-in the
desired station.
Note on DAB/DAB+ stations (CMT-SX7B only)
When you tune in a station that provides
RDS services, information such as the
service name or station name is provided
by broadcasts.
When tuning in a DAB/DAB+ station, it
may take a few seconds before you hear
any sound.
Primary service is automatically received
when secondary service ends.
This tuner does not support data services.
If reception of an FM stereo
broadcast is noisy
Select monaural reception by following
steps. This reduces noise.
1
Tune in the desired station, then
press MENU.
2
Press / to select “Tuner Menu,”
then press ENTER.
3
Press / to select “FM Mode,”
then press ENTER.
4
Press / to select “Mono,” then
press ENTER.
To receive stereo broadcast, select
“Stereo” following step 4.
To change the AM tuning interval
(CMT-SX7 only)
The default setting for AM tuning interval is
9 kHz (or 10 kHz for some areas). Use the
buttons on the unit to perform this
operation.
1
Press FUNCTION on the unit repeatedly to
select “TUNER AM.”
2
Press / to turn off the system.
3
Press and hold MENU and press / on
the unit.
“Step 9k” or “Step 10k” appears in the display.
When you change the interval, all the AM
preset stations are erased.
Listening to the radio
Loading ...
Loading ...
Loading ...