Loading ...
Loading ...
Loading ...
Installation instructions
8
Choice of location
The above diagrams determine the dimensions of a cabinet that will be able to hold your oven.
The oven can be installed under a work top or in a column of cabinetry (open* or closed) having
the appropriate dimensions for built-in installation (see diagram above).
Recessed fitting
Centre the oven in the unit to guarantee a minimum distance of 20mm with the adjacent unit.
The recessed unit must be made of heat resistant material (or coated with this type of material).
■
For increased stability, fasten the oven to the unit with 2 screws through the holes provided for
this purpose on the lateral uprights.
1) Make a Ø 2 mm hole in the wall of the unit to avoid the wood splitting.
2) Fasten the oven with the 2 screws.
Important!
To ensure that your installation is compliant, do not hesitate to contact a household appliance
specialist.
We accept no liability in the event of an accident or incident resulting from grounding that is
non-existent, faulty or incorrectly fitted. If the electrical installation in your household requires
modification for you to connect your appliance, contact a qualified electrician. If the oven
presents any anomaly, disconnect it from the power supply or remove the fuse from the oven
connection line.
550
597
550
23
378
560
550
min.
560
550 min.
457
(option 'A')
478
(option 'B')
445
20
50
10
50
450
(option 'A')
470
(option 'B')
Lower trim
(optional accessory,
purchased separately)
450
(option 'A')
470
(option 'B')
Two installation options:
Option ‘A’ - oven only (overall height 457 mm)
Option ‘B’ - oven + lower trim kit accessory
(overall height 478 mm)
Important!
If you choose installation option B,
you will need to install the lower
trim kit BEFORE you install the
appliance. Refer to the instructions
packed with the lower trim kit.
Note: If you are installing an appliance directly
over another, you have the option of using the
supplied black metal shelf cover to conceal the
shelf front that would be visible between the two
appliances. This needs to be fitted before
the lower trim kit and/or appliance is installed.
Refer to the instructions packed with the shelf
cover accessory kit.
Loading ...
Loading ...
Loading ...