Loading ...
Loading ...
Loading ...
To use AirPrint, ensure the following:
●
The printer must be connected to the same network as your AirPrint enabled device. For more
information about using AirPrint and about which HP products are compatible with AirPrint, visit the HP
Mobile Printing website at www.hp.com/go/mobileprinting. If a local version of this website is not
available in your country/region or language, you might be directed to the HP Mobile Printing site in
another country/region or language.
●
Load paper that matches the paper settings of the printer (see Load paper for more information).
Accurately setting the paper size for the paper that is loaded, enables a mobile device to know what
paper size it is printing.
Tips for print success
Ink tips
●
If the print quality is not acceptable, see Printing issues for more information.
●
Use Original HP cartridges.
Original HP cartridges are designed and tested with HP printers and papers to help you easily produce
great results, time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs
required as a result of using a non-HP supply will not be covered under warranty.
If you believe you purchased Original HP cartridges, go to www.hp.com/go/anticounterfeit.
●
Install both the black and color cartridges correctly.
For more information, see Replace the cartridges.
●
Check the estimated ink levels in the cartridges to make sure there is suicient ink.
Ink level warnings and indicators provide estimates for planning purposes only.
For more information, see Check the estimated ink levels.
Paper loading tips
For more information, see Load paper.
●
Ensure the paper is properly loaded in the input tray and then adjust the paper-width guides. Change the
paper settings if the paper size is not correctly detected.
●
Load a stack of paper (not just one page). All the paper in the stack should be of the same size and type
to avoid a paper jam.
●
Load paper with the print-side up.
●
Ensure that the edges of the paper loaded in the input tray are not bent or torn.
●
Adjust the paper-width guides in the input tray to t snugly against all paper. Make sure the guides do
not bend the paper in the tray.
26 Chapter 3 Print ENWW
Loading ...
Loading ...
Loading ...