Binder LIT MK 240 User Manual

Loading ...

MK LIT (E5) 01/2021 page 7/172

Dear customer,

For the correct operation of the chambers, it is important that you read this operating manual completely

and carefully and observe all instructions as indicated. Failure to read, understand and follow the instruc-

tions may result in personal injury. It can also lead to damage to the chamber and/or poor equipment per-

formance.

1. Safety

1.1 Personnel Qualification

The chamber must only be installed, tested, and started up by personnel qualified for assembly, startup,

and operation of the chamber. Qualified personnel are persons whose professional education, knowledge,

experience and knowledge of relevant standards allow them to assess, carry out, and identify any potential

hazards in the work assigned to them. They must have been trained and instructed, and be authorized, to

work on the chamber.

Only trained personnel with knowledge of the handling of hazardous substances and lithium-ion accumu-

lators as well as knowledge of the operating instructions may set up and install, commission, operate, clean

and decommission the chamber. Further technical requirements (e.g. electrical knowledge) and knowledge

of the service manual are required for maintenance and repairs. The requirements specified by the operator

for PPE (personal protective equipment) must be observed. Training on handling compressed gas cylinders

is required to replace the CO

compressed gas cylinder.

1.2 Operating manual

This operating manual is part of the components of delivery. Always keep it handy for reference in the

vicinity of the chamber. If selling the unit, hand over the operating manual to the purchaser.

To avoid injuries and damage observe the safety instructions of the operating manual. Failure to follow

instructions and safety precautions can lead to significant risks.

DANGER

Dangers due to failure to observe the instructions and safety precautions.

Serious injuries and chamber damage. Risk of death.

 Observe the safety instructions in this Operating Manual.

 Follow the operating procedures in this Operating Manual.

 Carefully read the complete operating instructions of the chamber prior to installing

and using the chamber.

 Keep the operating manual for future reference

Make sure that all persons who use the chamber and its associated work equipment have

read and understood the Operating Manual.

This Operating Manual is supplemented and updated as needed. Always use the most recent version of

the Operating Manual. When in doubt, call the BINDER Service Hotline for information on the up-to-date-

ness and validity of this Operating Manual.

1.3 Legal considerations

This operating manual is for informational purposes only. It contains information for correct and safe in-

stalling, start-up, operation, decommissioning, cleaning and maintenance of the product. Note: the contents

and the product described are subject to change without notice.

Loading ...

Binder LIT MK 240 dynamic climate chambers