Loading ...
Loading ...
Loading ...
10 English
Installing the hob
Installing the hob
Selection of installation equipment Ensuring adequate ventilation
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50 mm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 20mm. Please select heat
resistant and insulated work surface material (Wood and similar brous or
hygroscopic material shall not be used as work surface material unless impregnat-
ed) to avoid the electrical shock and larger deformation caused by the heat
radiation from the this appliance.
As shown below:
Under any circumstances, make sure the appliance is well ventilated and the air
inlet and outlet are not blocked. Ensure the appliance is in a good working state.
As shown below:
NOTE
The safety distance between the sides of the hob and the inner sides of the
work surface should be at least 3mm.
NOTE
The safety distance between the top of this appliance and the cupboard above the
this appliance should be at least 760 mm.
590 520 60 56 560+4
+1
490+4
+1
Min. 50 Min. 3
760 Min. 25 Min. 20 Air intake Air exit 2
L (mm) W (mm) H (mm) D (mm) A (mm) B (mm) X (mm) F (mm)
A (mm) B (mm) C (mm) D (mm) E (mm)
760mm
Min.30mm
wall
wall
760mm
Min.20mm
Loading ...
Loading ...
Loading ...