Loading ...
Loading ...
Loading ...
33
©
2019 DJI All Rights Reserved.
DJI FPV Air Unit
When replacing components of the air unit such as the air unit module, camera, or coaxial cable,
follow the steps below to disassemble and install.
Air Unit Module End
5. Make sure the coaxial cable is inserted
properly.
6. Mount the back cover of the air unit
module and tighten the screws.
1
2
3. Remove the component that needs to be
replaced and prepare the new component.
4. Align the plug with the connector on the
air unit, press the plug down to make sure
they are securely connected. Insert the
coaxial cable holder into the slot of the air
unit module.
1
2
1. Loosen the two screws on the back cover
of the air unit module, then remove the
back cover.
2. Use an appropriate tool (such as a paper clip)
to lift one side of the plug, and then remove
the coaxial cable from the air unit module.
2
1
1
2
Loading ...
Loading ...
Loading ...