Loading ...
Loading ...
Loading ...
32
©
2019 DJI All Rights Reserved.
Updating Firmware
Use DJI Assistant 2 to update the air unit, goggles, or remote controller separately.
1. Power on the device and connect it to a computer with a USB-C cable.
2. Launch DJI Assistant 2 and login with a registered DJI account.
3. Select the device and click “Firmware Update” on the left-hand side.
4. Select the firmware version required.
5. DJI Assistant 2 will download and update the firmware automatically.
6. Restart the device after the firmware update is complete.
Make sure that the device has sufficient power before updating firmware.
Maintenance
DJI FPV Goggles
Cleaning
Make sure to disconnect the goggles from the power outlet before cleaning and make sure that
there are no cables connected.
Clean the surface of the goggles with a soft, dry clean cloth. To clean the foam padding, moisten
the cloth with clean water, and wipe the foam padding.
Replacing the Foam Padding
The foam padding is attached to the goggles with Velcro. When replacing the foam padding, peel
it gradually from the left or right side. Align the new foam padding with the goggles and then press
the foam padding down so it is securely attached.
Maintenance of Lenses
Use a cleaning cloth to wipe the lenses gently.
1. Moisten the cleaning cloth with alcohol or a lens cleaner.
2. Wipe in a circular motion from the center to the outer edges of the lenses.
DO NOT clean the foam padding with alcohol.
The lenses are delicate. Clean them gently. DO NOT scratch them as this will damage the
overall viewing experience.
Store the goggles in a dry room at room temperature to avoid damage to the lenses from
high temperature and humid environments.
Loading ...
Loading ...
Loading ...