Loading ...
Loading ...
Loading ...
9
Tools and Accessories which
are needed
Scope of delivery
– Installation manual
– Operating instructions
– Installation accessories
Additional accessories
– Lateral additional heating
Necessary when the distance between
two appliances is less than 160 mm.
– Finger protection, extra long
– Connecting element for furniture doors
For connecting two furniture doors (see explanation on
page 32). It can be used for standard height furniture
doors without any preparation work.
Tools
– T20 rechargeable screwdriver
– T20 Torx screwdriver
– T20 Torx-bit magnetic holder
– 8 mm socket wrench
– Various size drills
– Fixed spanner SW 13 mm
– Adjustable spanner
– Knife with an adjustable blade
– Metal tape measure
– Angle of contact
– 60 cm and 120 cm spirit levels
– Straight edge
for stand-alone appliances min. 120 cm long
for setting up two appliances side-by-side min 200 cm
long
Miscellaneous
– Step ladder
– Trolley, wheelbarrow or sack barrow
– Hammer drill for drilling holes into the wall and floor
– Various size drills for various materials
– Wood plank, (min. 8 x 10 cm) as an alternative anti-tip
device. Length should correspond to the width of the
installation niche.
– Various size wood screws
– Thin (1.5 mm), suitable material to protect the floor
against damage (e.g. linoleum)
– Suitable material for covering and protecting the
cabinets (e.g. protective film)
– Adhesive tape
Loading ...
Loading ...
Loading ...