Loading ...
Loading ...
Loading ...
10
Installation manual
m Caution!
The following mounting instructions describe
mounting steps for various appliance models.
Therefore, deviations may occur from that shown
in the diagrams.
Reference is made to specific mounting steps for
individual appliances.
1. Checking the installation niche
m Warning!
In order to guarantee secure, trouble-free installation
and an optimal overall impression of the adjacent
cabinet frontage careful care should be taken in
ensuring that the installation niche corresponds to
the installation requirements.
Before starting with the installation, check that the
installation niche corresponds to all of the requirement for a
secure and trouble-free installation.
Check the subsurface.
Follow the notes in the section “Installation location”.
Check the dimensions of the niche.
Re-examine whether the niche has right angles.
Re-examine the positioning of the plug.
Additionally follow the instructions in the sections
“Electrical Connection” and “Dimensions of the
Installation Niche”.
Re-examine the positioning of the water connection
(for appliances with ice maker)
Additionally follow the instructions in the sections
“Water Connection” and “Dimensions of the
Installation Niche”.
Re-examine the stability and fastening of the
neighbouring cabinet parts. All cabinet parts in the
vicinity of the appliance have to be firmly connected
to the wall.
Re-examine that when opening the appliance door,
it does not collide with neighbouring kitchen parts.
2. Transporting the appliance
m Caution!
The appliance is very heavy. Handle it carefully,
as otherwise people helping to lift it could be hurt
or the appliance could be damaged.
Transport the appliance with an aid to transport which
is suitable (sack barrow, trolley or wheelbarrow).
When transporting, secure the appliance from being
tipped.
The appliance has a height of 2134 mm. If it is not possible
to support the appliance in a vertical position because of
the structure of the building, the appliance can be
transported on its side.
When putting the appliance up, pay attention to the
minimum height that is required at the assembly location
according to the following table.
3. Removing the packaging
m Caution!
– The appliance could tip over when unpacking.
– The appliance is very heavy.
– The appliance could tip over when the appliance
door is opened.
Handle it carefully, as otherwise people helping to lift it
could be hurt or the appliance could be damaged.
To protect the subsurface from damage whilst installing:
Put a carpet or spare piece of linoleum (or other such
item) down and attach it to the floor using adhesive
tape in front of the planned fitting site.
m Warning!
Always place the means of transport centrally on the
rear side of the appliance. Never push it in from the
front or from the side under the appliance.
Risk of damage to the appliance!
Move the appliance using a trolley, sack barrow or
wheelbarrow.
Putting the appliance
up on via its back side
Putting the appliance
up on via its rear side
wall
All types
218,5 cm
Never put the
appliance up via
its side!
Loading ...
Loading ...
Loading ...