Loading ...
Loading ...
Loading ...
4
Installing the appliance
Installation location
The appliance should be installed in a dry, well ventilated
space.
The location should not be exposed to the direct sunlight
and should not lie next to a source of heat such as
a cooker or a radiator etc. If installation next to a source of
heat cannot be avoided, either a suitable insulating plate
should be used or you should keep to the following
minimum distances:
– 30 mm from the electric cooker,
– 300 mm from a oil-fired or solid-fuel cooker.
m Caution!
The appliance is very heavy.
Empty weight: 195 kg
Atmosphere grades
The atmosphere grade is written on the identification plate.
It states the room temperature within which the appliance
can be operated.
Installation niche
It is important to keep to the stated dimensions of the
installation niche with a view to trouble-free fitting, and the
subsequent appearance of the kitchen furniture frontage.
Special care should be taken that the niche has right
angles. The side walls should not exhibit areas that stick
out, projections or unevenness.
You should determine the right angles of the installation
niche with appropriate means, e.g. by measuring
diagonally and by using a spirit level.
The side walls and the upper end of the installation niche
must be at least 16 mm thick.
Neighbouring kitchen furniture
The new appliance is screwed down tightly using parts
of the cabinet and the upper cabinet.
Care should therefore be taken, that all upper cabinets
to which something has been fastened are securely
connected to the subsurface or wall by appropriate
means.
The minimum thickness of the base should be a minimum
of 19 mm.
Subsurface
m Caution!
A fully laden appliance is heavy.
Weight: up to 540 kg
The subsurface must be level and even in order to ensure
that the appliance is securely installed and works correctly.
The subsurface must be made from a hard, non-flexible
material.
The floor of the installation space must have the same
height as the rest of the space.
On account of the weight of a fully-laden appliance, it is
necessary to have a bearing subsurface. In the case of
doubt, the help of architect or specialist builder should
be enlisted.
Atmosphere
grade
Permitted ambient
temperature
SN +10 °C to 32 °C
N +16 °C to 32 °C
ST +16 °C to 38 °C
T +16 °C to 43 °C
Loading ...
Loading ...
Loading ...